- Created by Robert Reiner, last modified on 22. Mar 2023
projectdoc Toolbox
Lists references to projectdoc documents. The rendering will add a link to a document, if there is a document with the given name hat is added to the body.
- Audience
- Categories
- Tags
- Type
Use the Name Body List Macro like the Name List Macro, but with the names added to the body of the macro.
This makes the names more easy to add, but requires some additional space.
Since changing the names is usually not a frequent task, saving space with the Name List Macro is often the better solution. But if property values change often, the Name Body List Macro is more convenient.
Changing a Name is a Refactoring
Note that changing the name of a document that is referenced by the Name List Macro will not update the value in the name list.
The Name List Macro assumes that the value it contains is correct. If the referenced document changes its name, the name in the macro will not be altered and simply do not render a reference.
If users need to alter the name value, this would require a refactoring. Rename the referenced document and exchange the name in each referencing Name List Macro.
For more information on name refactorings, please refer to the article Name Refactorings.
Properties
Doctype
The type of the documents to select.
The name of a document must be unique within its doctype for this macro to work property. It is not possible to reference several documents with the same name and document type.
It is allowed to specify more than one doctype. But keep in mind that the names must be unique for the set of selected doctypes.
Empty Where Clause Handling
If unchecked treat an empty where clause as match any (i.e. no constraint) or treat it as no valid match exists (in which case the displayed result is always empty).
You may temporarily uncheck the box to display all possible values.
Default Strategy
Select a strategy to calculate a default value in case no name is specified.
The following strategies are supported:
| Strategy | Description |
|---|---|
default | Use the value defined by the space property |
none | Simply keep the value empty. This is the default if not overridden by the space property. |
all | Render all matching names. This parameter is deprecated and should not be used: Property values derived by searches do not create reproducible results. |
ancestor | Render the first doctype-matching ancestor document's name. |
ancestor-property | Render the first ancestor's unique property value. Use the 'Property' parameter to define the name of the ancestor property whose value is to be displayed. All other parameters have no effect on the rendering for this special use case. Since 4.8 The strategy |
Note that the Parent Name parameter is also providing a strategy to render name values.
Since 6.0
This parameter is available for the Name Body List Macro since version 6.0 of the projectdoc Toolbox.
Sort Strategy
The sort strategy to apply to specified names. This allows to render the names provided by users to be sorted before they are rendered.
The following strategies are supported:
| Strategy | Description |
|---|---|
none | Keep the names in the order entered. This is the default. |
asc | Sort the names in ascending lexical order. |
desc | Sort the names in descending lexical order. |
Since 6.1
This parameter is available since version 6.1.
Space Key
To limit the search on documents to the space with the given key. The editor allows to scan for space names. If you want to select more than one space, use the text field below in addition to this field. Only if no space is specified, the current and its delegate spaces are taken into account.
Space Keys
To limit the search on documents to the spaces with the given keys. Use this if you want to search in several spaces. Leave blank, if you want to search in the current space only. Use "@all" to search in all spaces. Only if no spaces are specified, the current and its delegate spaces are taken into account.
Render List as comma-separated Values
If checked, the list is comma-separated, otherwise the rendering produces an unordered list. If rendered with commas, the names are always shown as text. Otherwise they may be rendered as boxes.
Please refer to Box Style for details.
Restrict to one Value
If checked only one value is allowed to be selected.
The whole content is regarded as one single value and will not be split up.
Restrict to Range
If checked only values defined by the referenced doctype and constraints are allowed.
The range of valid values is defined by the doctype and the where parameter.
Refer to Define Status Tags for an example on how to define property value ranges.
If authors specify values not within the defined range, they are dropped.
If in addition to the range restriction the one-value restriction is also enforced, only the first value will be taken into account. That is: if two values are specified, where the first is not in the range, but the second is, then no value will be rendered.
Matcher
Use the matcher to filter on the name documents. Applies only if the Unique Property parameter is either the name, short name, or identifier.
In case you want to allow users to select only those values that are valid according to the matcher, check Restrict to Range. If the restriction to the range is applied, no other value can be selected.
Do not use dynamic Values as Property Values
Do not use any other attribute than name (Name), short name (Short Name), or identifier (Identifier) to select documents to render with this macro.
If other properties are used, the macro runs a Lucene query. If a property value is dependent on a query result, the value will not automatically be rerun if new documents are added or existing documents are altered. So the result stored with Lucene (at the time the document is saved) may not match the values rendered when the macro is shown on the page (at render time).
Lucene queries also require that all documents are present to create valid results. In case of a database rebuild this constraint is not met.
The parameter value is a constraint the documents need to match to not be filtered from the result set.
The syntax is different from those you specify in case you run a Lucene search. In queries you check the property values of the child documents.
If the property name you need to match is a alphanumeric token, you do not need to encode it (e.g. Year=2019). If it has a space, use $[...] as delimiters for the property name. For instance $[Customer Reference]. This is similar to the encoding used for Lucene queries with the Display Table Macro. You may also use ${...} or $<...> as delimiters, but there is no reason to do so since property names should not contain special characters.
We recommend to use the square brackets ($[...]) since these are also used for Lucene queries of the property name contains a space (see Search Tips).
Values that have no spaces and are plain tokens do not need to be encoded to compare with a property property value (e.g. $[Zip Code]=45672. In case there is a space, you can use quotes as in $[Customer Reference]="123 ABC".
You may also compare the property value of the document in the result set with a property value of the document the macro is part of. Use ${...} to reference the document property by its name, for instance: $[Customer Reference]=${Default Customer Reference}
The following options are available
| Type | Examples | Explanation |
|---|---|---|
| String Literal |
| Use string literals if the property to match with contains spaces. |
| Token |
| If the value does not contain spaces, no double quotes are required. |
| Integer Literal |
| For integer numbers, no double quotes are required. |
| Property Reference |
| For property references, no double quotes are allowed. |
You may combine your property constraints by the following Boolean operators.
| Operator | Description |
|---|---|
| & | AND - both properties need to match |
| | | OR - only one of the two properties need to match |
| ! | NOT - only true if the property does not match. |
Use parentheses to group your expressions.
Example Matcher Expression with !, |, and &
!($[Property A]="Value 1" | !$[Property B] = "Value 2") & $[Property C] = "Value 3"
Since 6.2.5
Since version 6.2.5 list values are allowed on both sides of a property reference expression.
$[Customer Reference]=${Default Customer Reference}
If Customer Reference and Default Customer Reference both resolve to lists of values, then each value of each set is compared. If one tuple matches, the whole expression is resolved as a match.
Currently the projectdoc Toolbox does not support lists of literals (workaround: resolve with OR connector) or comparisons with greater than or less than. Only exact matches are supported.
Property
The name of the property the values in this list are values for. This property is useful for template designers to associate the value with the name of a property.
This allows queries to reference the ancestors of a document referenced here. See Search Tips for details.
No Create Links
When selected, overrides to disallow the rendering of names with links to create new documents.
The use of this parameter requires that a valid doctype is set via the Doctype parameter. Otherwise the macros does not know which document to create and renders a plain link.
Only relevant in case Document Creation for Name List is active.
Since 4.6
Available since version 4.6.
Where
A Lucene search expression to filter on the results.
This parameter only applies in case a name is provided, if the identifying property is neither the name, the short name, or the identifier of a document (in which cases the Matcher parameter is used for filtering).
If no name is provided, but the search scope is everything, the constraint specified with the Where Parameter is applied. This use case is deprecated because it requires a search to find propert values.
This parameter is deprecated to select on values.
See Do not use dynamic Values as Property Values for details.
For more information on queries, please refer to Search Tips.
Curly Braces
Curly braces may cause problems on some instances of Confluence when used in a string parameter field of a macro. This is especially true (and reproducible) if you use an opening and an immediate closing bracket like this: "{}".
This is a known issue (CONFSERVER-33399) and is also discussed in Do curly braces in string macro parameters break the macro?
To work around this problem you may escape the curly braces with a backslash as in
$[Story Points] = $\{Magic Value\}
You need to use this workaround if you cannot save the page (as described in the issue above). Otherwise it is just a failed rendering of the macro in the macro editor.
This issue is solved since version 5.0.
Link Properties
Removed since 3.1
If the Display Template Parameter is specified, name the properties here to render a link to the document the name value refers to.
If none is specified, the whole template value is considered to be the label for the link.
Unique Property
The name of the property to select the document. The property has to be unique and defaults to the Name property.
Display Template
Template to render instead of the plain property value.
Define property placeholders which will be replaced by the referenced property values. A property placeholder starts with ${, contains the name of the property it is a placeholder for, and ends with a curly brace.
Use templates like this to refer to properties.
The $[Name] is not ${Subject}.
The placeholders will be replaced by the values of the property Name and Subject.
The use of $[...] renders a link.
The use of Deep Links is supported.
The $[Name] is not ${Ref->Type}.
Since 4.6
Since version 4.6 there is a text version of the property that provides the list of names. This allows queries to match the document by its name although the property value is rendered by the template.
A typical use case is to render the name of persons and their organizations with a template, for instance on a minutes document. The property would be called "Attendees". For matching this document by a person (to see which minutes mention a particular person), it is inconvenient and error prone if the query would need know the pattern with the person's name and organization for the match. Therefore queries will always match by the name of the referenced property. The text form "Attendees$" can be used to match with the text rendered by the template.
When accessing the value, for instance with the Display Document Property Macro, the property "Attendees" will return the rendered HTML code snippet controlled by the template. In case the text form with the plain names needs to be accessed, use "Attendees$".
Label
In case there is only one name in this list, this label overrides the name.
If this macro is used in a section body to reference a document, e.g. a glossary item, then the label being rendered may be different from the name or any other property of the document.
In these use cases, where there is only one name, the label will be rendered instead of the property. This is similar to Confluence links, where per default the title of the referenced document is rendered, but the label of the link may be an arbitrary string.
Deprecated since 5.1
The use of the Label Parameter is deprecated since version 5.1 of the projectdoc Toolbox.
Use the parameter Display Template (without placeholders) as a replacement.
CSS Classes
Set the Cascading Style Sheet (CSS) classes for the rendered reference.
The classes are only rendered if a list is rendered. Not for single elements and not for the comma-separated representation.
Identifier
Unique identifier of the macro for the rendered context.
Features may supply default configurations dependent on the value of this property.
Since 4.0
This parameter is available since version 4.0 of the projectdoc Toolbox.
Identifier Classes
Identifiers to address this macro as part a group for the rendered context.
Features may supply default configurations dependent on the value of this property.
Since 4.0
This parameter is available since version 4.0 of the projectdoc Toolbox.
Autocomplete Sort
Control the sort order for the autocomplete feature of this macro.
This parameter has only effect on the autocomplete feature of this macro. If empty, the default sort order is defined by the Sort Key property of the documents.
Since 4.0
This parameter is available since version 4.0 of the projectdoc Toolbox.
Details
Box Style
Configure the Name List Macro to draws boxes around the referencing names. Per default boxes are drawn for categories and tags. This can be switched on or off by using the space property called Name List Doctype Box Style.
The default behavior is configured by the space property Name List Default Box Style.
The syntax for the space property's name is based on this naming scheme:
name-list-(doctype)-boxstyle true/false
For example use the following to disable the rendering boxes for categories:
name-list-category-boxstyle false
Change the style of the box - most commonly used to change the background color - by adding a document property to the document instance for which you want to change the style.
For instance, if you want to change the background color for the document Example of the doctype Category, add the document property CSS Style Information to the Example document (please refer to Document Properties Marker Macro for more information on document properties and how to add them to a document instance).
The value for the CSS Style Information may not only contain verbatim text. Therefore from that version on you may use macros to construct the value.
The value for the property CSS Class Information is supported to set values for the rendered HTML class attribute.
Logging
In case the Health Logging (de.smartics.projectdoc.atlassian.confluence.tools.health, see Logging) is activated, this macro will render issues with names not referencing a document.
The missing name is rendered together with the page coordinates (space key, title, identifier).
Related macros
| Name | Short Description | Tags |
|---|---|---|
| Breadcrumb Macro | Renders a breadcrumb for the current page. | Link |
| Child Documents Macro | Renders the list of child documents, matching the given filter criteria. | |
| Display Document Properties Macro | Renders a template with property references. | |
| Display Document Property As Image Macro | Renders the value of a document property as an image. The property value is required to an URL that points to an image. | |
| Display Document Property As Link Macro | Renders the value of a document property as a link with an alternative label. | |
| Display Document Property As List Macro | Renders the list value of a document property. | |
| Display Document Property Macro | Renders the value of a property of a document. | |
| Display Document Property Ref Concat Macro | Displays a single property of a document that is referred by a property of another document and concatenates it with the value of a local property. | |
| Display Document Property Ref Macro | Displays a document property from a referenced document. | |
| Display List Macro | Lists references to projectdoc documents in a list. List contain names and optional short descriptions. | |
| Display List Template Macro | Lists references to projectdoc documents in a list. List items are defined by templates referencing properties. | |
| Display Space Attribute Macro | Renders a space attribute value. | |
| Display Space Property Macro | Renders a space property value. | |
| Display Table Macro | Lists references to projectdoc documents in a table. Allows to select document properties for columns. Also non-list representations are provided. | |
| External Link Macro | Renders a locale dependent link to an external resource. The body of the macro contains the link label. | |
| Hudson Link Macro | Render links to jobs and services on a Hudson server. | |
| Index Card Macro | Renders transcluded content fetched from documents of a result set. | |
| Index Entries Table Macro | Renders a table of index entries. | |
| Javadoc Link Macro | Links API documentation pages for Java elements. | |
| Name List Macro | Lists references to projectdoc documents. The rendering will add a link to a document, if there is a document with the given name. | |
| Nexus Link Macro | Renders a link to an artifact stored on a Nexus server. | |
| Parent Property Macro | Renders the property of the parent document, if it has the same doctype. | |
| Role List Macro | Renders a name list while taking care of special role semantics. Confluence names of groups with view permissions are added to the list of values. | |
| Site Link Macro | Links to a resource on a versioned site. | |
| Sonar Link Macro | Renders a link to a project on a Sonar service. | |
| Subversion Link Macro | Renders a link to a resource on a Subversion (SVN) repository. | |
| Tag Body List Macro | Lists references to projectdoc documents. The rendering will add a link to a document, if there is a document with the given name hat is added to the body. | |
| Tag List Macro | Renders a name list while taking care of special tag semantics. Confluence labels are added virtually to this list and displayed in the tags table row of the document properties table. | |
| Tour Macro | Renders a predefined list of documents in a table. | |
| Tour-by-Property Macro | Renders a predefined list of documents in a table . Documents are selected by a document property. Allows to select document properties for columns. Also non-list representations are provided. | |
| Transclude Documents Macro | Renders transcluded content fetched from documents of a result set. | |
| Transclusion Macro | Transcludes content from a document marked with the content marker macro. | |
| Transclusion Reference Macro | Transcludes content via a reference from a document marked with the content marker macro. | |
| Wiki Link Macro | Allows to render a link to a wiki page. |
